Angled weld with internal thread - NS
| TYPE | A | f B | C | D | f E | F | G | (H) | SEALING Cu |
| NSM 20 | M20x1,5 | 28 | 25, 35, 50 | 15 | 24,5 | 0,8 | 20,5 | C + 28 | 24 x 20 x 1,5 |
| NSM 27 | M27x2 | 35 | 35, 50, 70 | 20 | 32,5 | 1,2 | 27,5 | C + 35 | 32 x 27 x 2 |
| NSXM 27 | M27x2 | 40 | 35, 50, 70 | 20 | 32,5 | 1,2 | 27,5 | C + 40 | 32 x 27 x 2 |
| NSG 34 | G 3/4" | 35 | 35, 50, 70 | 20 | 32,5 | 1,2 | 27,5 | C + 35 | 32 x 27 x 2 |
| NSXG 34 | G 3/4" | 40 | 35, 50, 70 | 20 | 32,5 | 1,2 | 27,5 | C + 40 | 32 x 27 x 2 |
| USE: | For the well mounting of the indicating thermometer, the temperature sensor of the calculator, the pressure outlet for the pressure recorder or the pressure transmitter. | ||||||||
| Work pressure: | - 20 to + 150 °C | ||||||||
| Material: | Carbon unalloyed steel | ||||||||
| Design: | Without surface treatment | ||||||||
| Order example: | WELD NSM 27.1 - length C (.0 - without gasket, .1 - with gasket) Angled welding NS with internal thread M 27x2 including gasket, length C = 50 mm. | ||||||||
| Note: | Upon agreement, it is possible to supply welds of other lengths or inspection certificate 3.1B according to ČSN EN 10204. | ||||||||
Weld NSM, NSG: (mat. 11 353.1; P 265 GH)
NSM 20 - Work pressure:
PN 40 For welding as a single oblique neck in a longitudinal section into a pipe according to ČSN 42 5715,
wall thickness according to ČSN 13 1030 for corrosion allowance of pipe and weld 1 mm.
NSM 27, NSG 34 - Work pressure:
PN 40 For welding as a single oblique throat in a longitudinal section into a pipe according to ČSN 42 5715,
wall thickness according to ČSN 13 1030 for the corrosion allowance of the pipe and weld 0,7 mm.
CALCULATION PERFORMED ACCORDING TO ČSN 69 0010. IN ALL OTHER CASES IT IS NECESSARY
COMPLETE THE REINFORCEMENT NODE CALCULATION ACCORDING TO ČSN 69 0010 OR ANOTHER REQUIRED REGULATION..
Weld NSXM, NSXG: (mat. 11 523.1)
Work pressure:
PN 40 For welding as a single oblique throat in a longitudinal section into a pipe according to ČSN 42 5715,
wall thickness according to ČSN 13 1030 for the corrosion allowance of the pipe and weld 1,5 mm.
PN 63 For welding as a single oblique throat in a longitudinal section into a pipe according to ČSN 42 5715,
wall thickness according to ČSN 13 1030 for the corrosion allowance of the pipe and weld 0,8 mm.
CALCULATION PERFORMED ACCORDING TO ČSN 69 0010. IN ALL OTHER CASES IT IS NECESSARY
COMPLETE THE REINFORCEMENT NODE CALCULATION ACCORDING TO ČSN 69 0010 OR ANOTHER REQUIRED REGULATION..
Eliška